E6000 Clear Spray Adhesive 118.2ml

  • Sale
  • Regular price $19.00
Tax included.


Instructions for Use

Follow these simple directions when using E6000 Adhesive Sprays:
1. Shake well before use.
2. Protect work area from over-spray.
3. Point spray nozzle away from face.
5. Hold bottle 20-30cm away from surface and Spray.

PAPER, PHOTOS, CARDBOARD & FOIL: Spray a thin coat to one surface. Join surfaces. Apply pressure periodically, ensuring secure contact. Dry 1-3 minutes.
POROUS MATERIALS (including foams and Styrofoam): Spray a heavy coat to both surfaces to be joined. Mate surfaces together. Allow to dry.
                                                                                                                  Maximum strength usually achieved in 1-5 hours. Up to 12 hours for Styrofoam.
NON-POROUS MATERIALS: Spray a light coat to one surface. Mate surfaces together. Allow to dry.

IMPORTANT – CLEAN NOZZLE AFTER EACH USE: To prevent clogging, remove and rinse nozzle/straw. Pump warm tap water through sprayer until all adhesive is cleared out. Then dry, replace in the bottle, secure cap. *Maximum strength may not be reached for 1-5 hours. Styrofoam may require an overnight cure.

FAQ's

What Surfaces does E6000 Spray Adhesive work on?
E6000 Spray can be used on a wide variety of surfaces. Use on paper, wood, poster boards, cardboard, photos, foil, medium- to heavy-weight fabrics, vinyl, foam, Styrofoam, glass, felt, plastic, rubber, leather & metals.

What temperature range can E6000 Spray Adhesive withstand?
Application temperature: Best applied between 50 - 130 °F (10 - 54 °C). Service temperature / heat resistance: 30 - 150 °F (10 - 65 °C).

Is E6000 Spray Adhesive UV resistant?
Resists yellowing.

Can E6000 Spray Adhesive be used on Styrofoam™?
Yes. E6000 Spray can also be used on other foams.

Is E6000 Spray Adhesive water resistant?
Yes. Cured adhesive has good water resistance.

How long does E6000 Spray Adhesive take to dry?
Paper, photos, cardboard and foil: (read directions) Allow to dry 1 to 3 minutes. Porous materials: (read directions) Allow to dry 1-5 hours. Styrofoam may require an overnight cure. Non-Porous Materials: (read directions) Allow to dry 1-5 hours.

What is used to clean up uncured E6000® Spray Adhesive?
Regular warm water rinsing.

x

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods